Roman blinds provide privacy, insulation and complete light control. Inspired by the latest trends in soft furnishings, fabric roman blinds are hand finished to the highest standards. Suitable for any area of the home but also practical in offices and other commercial locations.
Our fabric Roman blinds have been developed with an emphasis on design, quality and reliability and are manufactured using a unique endless ball chain system. The advantage of this is a blind which can be precisely and easily controlled. Blinds are supported on aluminium headrail which measures 40mm wide by 40mm deep and is powder coated in White. This attractive curved profile design conceals the technical hardware from view. A square support rod made from steel for added strength runs through the headrail. Clear moulded UV resistant acetal winding spindles are secured to the support rod being screwed in position to prevent sideways movement and potential fabric distortion. 1.8mm high tenacity 100% polyester multifilament cord winds around the spindles as the blind is raised or lowered. The winding spindles are appropriately positioned along the width of the headrail to ensure the blind hangs straight and level. Velcro is fitted to the front edge of the headrail into a special grooved channel on to which the blind fabric is attached. A satin or blackout lining is sewn on the reverse of the fabric and elegant folds are created thanks to high quality roman blind tapes which are spaced equally along the length of the blind. The blind tapes feature a continuous woven pocket into which fibreglass rods are inserted ensuring perfectly symmetrical folds are achieved every time the blind Is operated. A 4:1 ratio geared unit ensures fast and smooth operation of both lighter and heavier weight blinds up to 2500mm wide by 2500mm drop. An aluminium bottom bar fits neatly into the bottom of the blind keeping the fabric properly tensioned at all times. White moulded endcaps conceal the ends of the headrail neatly finishing off the overall appearance.
All our roman blinds are manually controlled with a beaded chain lift cord to raise and lower the slats and a control cord to tilt the slats backwards and forwards. These controls can be positioned on either side of the blind or both together on the same side.
Universal installation brackets made from galvanised steel are powder coated in White to match the headrail. Brackets can be face fixed or top fixed to almost any location. Extension brackets are available to push the blind out past window handles and other obstructions.
An extensive range of luxurious fabric are available across a huge palette of styles and designs. All fabric roman blinds come fully lined with a choice of optional coloured linings and are also available in a blackout lining for most fabrics.